Home   /   Product
ODME VAF Instruments Oilcon® Mark6 Discharge Monitoring

ODME VAF Instruments Oilcon® Mark6 Discharge Monitoring


ODME VAF Instruments Oilcon® Mark6 Discharge Monitoring


Maker : VAF Instruments

Model : Oilcon® Mark6 Discharge Monitoring


For the continuous on-line monitoring of discharge water during de-ballasting Operations, VAF Instruments is one of world’s main suppliers. The Oilcon ® Mark 6 oil discharge monitoring & control systems are more reliable and more accurate than any other monitoring & control system. It is suitable for all ballast and slop water discharges. The Oilcon ® Mark 6 Oil Discharge Monitoring & Control Systems apply to the highest quality standards. The system fully complies with MARPOL requirements and is standard equipped with a panel mount Main Control Unit. The system is equipped with a comprehensive range of alarms and controls. All this and more from a fully ISO 9001 certified company.

Technical specification:

Weight: 1,5 kg
Dimensions: (W x H x D): 257 x 157 x 126 mm
Range: 0 – 1000 ppm
Accuracy: In accordance with IMO Resolution MEPC. 108(49), the system response is within the accuracy specified
Response time: Less than 8 seconds
Sample flow rate: Between 450 and 550 l/h
Zero noise and drift: Less than 2 ppm and nil when changing from fresh water to sea water Response to oils: In accordance with IMO specifications
Sensivity: to solids In accordance with IMO Resolution MEPC. 108(49) accuracy limits Fouling Clears: in less than one minute after IMO fouling test
Water temperature range: 5˚C – 65˚C
Maximum ambience temperature: 55˚C
Alarm setting: Adjustable over full range
Alarm outputs: NO/NC contact (2A at 220 VAC max)
Electrical supplies: 115/230 VAC 1 phase 50/60 Hz 380/460 VAC 3 phase 50/60 Hz 24 VDC Air supply: 4 – 7 bar, dry clean air
Sample points: Optional up to 6 samples points
Valve control: Dirty ballast relays on MCU
Ex proof classification: II (1) G [Ex ia] IIB (interface) and II 1 G Ex ia IIB T4 (detector cell).